Grass Valley SiteConfig Migration Instructions - Manual (Page 23)

3. Configure the settings for the network as follows:
• Type – The link layer of the protocol stack, such as Ethernet or Fibre Channel.
• Usage – The function of the network, related to the type of traffic the network
carries, such as control or file transfer.
• Redundancy – Specifies if the network supports redundancy and if the network
is primary or secondary.
• Name – The name of the network, as it is displayed in SiteConfig and identified
in host files.
• Exclude from Host Files – If selected, SiteConfig does not write the network’s
hostnames and IP addresses to the host files that it copies to networked devices.
• Managed – Network settings are managed by SiteConfig.
• Base IP Address – The first (lowest) IP address in the range of IP addresses
managed by SiteConfig.
• Number of Addresses – The number of IP addresses in the range managed by
SiteConfig.
• Subnet Mask/Gateway IP Address – Additional network settings managed by
SiteConfig.
• Unmanaged – Network settings are managed by mechanisms external to
SiteConfig.
02 July 2009 SiteConfig Migration Instructions 23
Start system description