Grass Valley SiteConfig Migration Instructions - Manual (Page 21)

For control network Setting...
Unselected is required. Related settings are disabled. Unmanaged
Servers providing DNS for name resolution. Allowed. DNS Servers
Not allowed Default Interface
Name Suffix
4. Click OK to save settings and close.
Creating the FTP/streaming network for stand-alone K2 clients (optional)
If you transfer media to/from the stand-alone K2 client, create a FTP/streaming network.
1. In the Network Configuration | Networks tree view, select a System node or a Site
node.
2. Proceed as follows:
• To add a network under the currently selected node, in the tree view right-click
the node and select
Add Network .
The Network Settings dialog box opens.
3. Configure the settings for the network as follows:
For FTP/streaming network Setting...
Ethernet is required Type
FileTransfer is required Usage
None is required. This is true even on a redundant K2 SAN.
(Only the iSCSI network is redundant on a redundant K2 SAN.) Redundancy
Streaming is recommended Name
Unselected is required Exclude from
Host Files
Selected is required Managed
The first (lowest) IP address in the range of IP addresses
managed by SiteConfig. Required. Base IP Address
The number of IP addresses in the range managed by SiteConfig.
Required. Number of
Addresses
The network's subnet mask. Required. Subnet Mask
Additional network settings managed by SiteConfig. Allowed. Gateway IP
Address
Unselected is required. Related settings are disabled. Unmanaged
02 July 2009 SiteConfig Migration Instructions 21
Start system description