Grass Valley Apex v.2.0 - Manual (Page 100)

102 APEX — Installation and Service Manual
Section 3 — Installation
Max Size Switch
The Max Size switch ( Figure 45 ) applies only to Standard Apex systems.
Settings are shown in Table 4 .
Figure 45. Max Size Switch
The following information will help determine the Output Monitor
address.
• For Stereo modes: The Output Monitor address will be this number
plus one.
• For MONO mode: The Output Monitor address will be twice this
number plus one.
Note The number on this switch represents the maximum number of stereo pairs
in the system. Therefore the rule stated above (one chassis = 256) remains
true even when a router is operated in mono mode. For example, a mono
mode 512 x 512 router would still be set to 256.
Table 4. Max Size Switch Settings (Standard Apex only)
Total number of chassis in
system
Switch setting
(setting applies to all
chassis in system)
1 256
2 512
3 768
4 1024
1536
1792
2048
1280
1024
768 512
256
MAX SIZE