Grass Valley 8943CF - Manual (Page 34)

34 8943CF — Instruction Manual
Configuration and Monitoring
Local Monitoring and Configuration
The 8943CF module can be configured and monitored locally using
on-board rotary and paddle switches and the status and configuration
LEDs mounted on the top of the module circuit board. If an 8900NET (Net
Card) module is present for providing remote monitoring, refer to Remote
Monitoring and Controls
on page 39 .
Local On-board Status Monitoring LEDs
As shown in Figure 25 , there are three sets of on-board status LEDs on the
top of the circuit board for local monitoring:
• Module status for FAULT, POWER, COMM, and CONF.
• Signal PRESENT and RATE DETECTED (3G, HD, or SD).
• Fiber optic SFP device PRESENT.
Refer to Table 2 on page 35 for an description of each LED color and func-
tion.
Figure 25. On-board Status LED Monitoring
Module Status LEDs
Signal Status LEDs
Fiber Optic Option
Present LEDs