Grass Valley 8943CF User Manual
Page 29
8943CF — Instruction Manual
29
Installation
To utilize a 16 channel configuration using the 8939FCA and 8939FCB mod-
ules, follow the setup below.
Install the CWDM fiber optic SFP devices on the 8943CF as described in
CWDM Configuration
. You will be using the EXP ports to connect
to the 8939FCB instead of a 1310nm GeckoFlex fiber-ready module.
The 8943CF modules feeding the 8939FCA should have the following fiber
optic SFP devices installed for channels 1-8:
•
SFP-CWDM3G-1-K Dual Transmitter (1490nm/1470nm frequencies)
•
SFP-CWDM3G-2-K Dual Transmitter (1510nm/1530nm frequencies)
•
SFP-CWDM3G-3-K Dual Transmitter (1550nm/1570nm frequencies)
•
SFP-CWDM3G-4-K Dual Transmitter (1590nm/1610nm frequencies)
The eight additional channels are provided by two 8943CF modules
feeding the 8939FCB with the following CWDM transmitter SFP devices:
•
SFP-CWDM3G-5-K Dual Transmitter (1310nm/1330nm frequencies)
•
SFP-CWDM3G-6-K Dual Transmitter (1350nm/1370nm frequencies)
•
SFP-CWDM3G-7-K Dual Transmitter (1390nm/1410nm frequencies)
•
SFP-CWDM3G-8-K Dual Transmitter (1430nm/1450nm frequencies)
The 8943FC modules receiving the fiber from the 8939FCA and the
8939FCB should have SFP-13103G-M1DRX-K Dual Receivers installed in
all SFP locations. Refer to the detailed diagram in
.