H3C Technologies H3C Intelligent Management Center - Manual (Page 72)

65
4. Select the subcomponents you want to deploy. In this example, select TACACS+ Authentication
Manager and click OK.
5. In the Configure TACACS+ Authentication Manager window (see Figure 60 ), configure the
following parameters:
{
Database Password/Confirm Password—These fields are automatically populated with the
database password configured when the IMC Platform is installed. Do not change the values of
these fields unless the database password of the IMC Platform is changed after installation.
{
TAM Server's IP Address—This field displays the IP address of the host on which TAM is to be
deployed. By default, the IP address of the current host is displayed. Use the default value in this
example.
Figure 60 Configure TACACS+ Authentication Manager
6. Click Deploy.
After the deployment is complete, the Batch deploy succeeded window appears, as shown
in Figure 61 .
Figure 61 Batch deploy succeeded