Installing nta – H3C Technologies H3C Intelligent Management Center User Manual
Page 48

41
•
Network Traffic Analyzer Server and Network Behavior Analyzer Server, which can be deployed
on the master server, a subordinate server, or both.
H3C recommends that you deploy the Network Traffic Analyzer Server and Network Behavior Analyzer
Server subcomponents as follows:
•
On networks with moderate traffic load, deploy these subcomponents only on a subordinate server.
•
On networks with high traffic load, deploy these subcomponents on the master server and a
subordinate server at the same time.
The following information uses a typical NTA deployment scheme, in which:
•
Network Traffic Analyzer and Network Behavior Analyzer are deployed on the master server.
•
Network Traffic Analyzer Server and Network Behavior Analyzer Server are deployed on a
subordinate server.
Installing NTA
1.
Select Install other IMC Components and click Finish in the Installation Completed window
(see
) or perform one of the following operations as needed:
{
On Windows:
−
Select Start > All Programs > H3C Intelligent Management Center > H3C Deployment
Monitoring Agent. On the Monitor tab, click Install.
−
Right-click the Intelligent Deployment Monitoring Agent icon in the system tray and select
Install from the shortcut menu.
{
On Linux, run the dma.sh script in the /deploy directory of the IMC installation path. On the
Monitor tab, click Install.
The Choose folder dialog box appears, as shown in
.
Figure 28 Choosing folder
2.
Insert the IMC NTA installation CD into the DVD-ROM drive. Then, in the Choose folder window,
click Browse and select the install\components folder on the CD.
3.
Click OK.
The H3C IMC Installation Wizard appears, as shown in
.