H3C Technologies H3C SecBlade IPS Cards - Manual (Page 81)

74
• Add interface GigabitEthernet 4/0/1.
• Click Apply.
# Add an external security zone.
• Click Add.
• Type zone2 as the name.
• Add interface GigabitEthernet 4/0/2.
• Click Apply.
# Add segment 0.
• Select System Management > Network Management > Segment Configuration, and click Add
Segment, as shown in
Figure 58 . Perform the following operations on the Add Segment page, as
shown in Figure 59 .
Figure 58 Segment configuration
Figure 59 Add a segment
• Select 0 from the Segment No drop-down list.
• Select zone1 from the Internal Zone drop-down list, and zone2 from the External Zone drop-down
list.
• Select Ten-GigabitEthernet2/0/1 from the Internal Interface drop-down list.
• Click Apply.
# Add a rule for URL Filter Policy, which is the default URL filtering policy.
• Select URL Filtering > URL Filtering Rules, and click Add, as shown in Figure 60 . Perform the
following operations on the Add Rule page, as shown in Figure 61 .