H3C Technologies H3C SecBlade IPS Cards - Manual (Page 80)

73
Figure 55 OAA configuration
• Type v3user as the username.
• Type 192.168.1.1 as the IP address of the OAA server.
• Type 100 as VLAN ID.
• Type 192.168.1.2 as the IP address.
• Type 255.255.255.0 as subnet mask.
• Click Apply.
# Test the connectivity.
• Click Test Connectivity on OAA configuration page.
• The system shows that the connectivity test is successful.
# Add an internal security zone.
• Select System Management > Network Management > Security Zone, and click Add, as shown in
Figure 56 . Perform the following operations on the Add Security Zone page, as shown in Figure 57 .
Figure 56 Security zone
Figure 57 Add a security zone
• Type zone1 as the name.