H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 82)

10-14
Configuration procedure
1) Configuration on the fat AP
# Create a WLAN BSS interface.
system-view
[AP] interface WLAN-BSS 1
[AP-WLAN-BSS1] quit
# Configure a clear-type service template, and configure its SSID as service, specify the open-system
authentication mode, and enable the WLAN service template.
[AP] wlan service-template 1 clear
[AP-wlan-st-1] ssid service
[AP-wlan-st-1] authentication-method open-system
[AP-wlan-st-1] service-template enable
[AP-wlan-st-1]quit
# Bind WLAN-Radio 1/0/1 to service template 1 and WLAN-BSS 1.
[AP] interface WLAN-Radio 1/0/1
[AP-WLAN-Radio1/0/1] radio-type dot11ag
[AP-WLAN-Radio1/0/1] channel 149
[AP-WLAN-Radio1/0/1] service-template 1 interface WLAN-BSS 1
2) Configuration verification
z The clients can associate with the AP and access the WLAN.
z You can use the display wlan client and display connection commands to view the online
clients.
802.11n Configuration Example
Support for 802.11n depends on your device model.
Network requirements
As shown in Figure 10-12 , it is required to deploy an 802.11n network to provide high-bandwidth access
for multi-media applications. More specifically:
z The AP provides a plain-text wireless service with SSID service.
z 802.11gn is adopted to inter-work with existing 802.11g network.
Figure 10-12 802.11n configuration
LAN Segment