Wds configuration task list, Configuring wds port security – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual
Page 63
9-3
Figure 9-3 Mesh bridging
MP 2
MP 1
LAN Segment 2
LAN Segment 1
MP 4
MP 3
WDS Configuration Task List
Complete the following tasks to configure WDS:
Task
Remarks
Required
Required
Optional
Mapping a Mesh Profile to the Radio of an MP
Optional
Mapping an MP Policy to the Radio of an MP
Required
Specifying a Peer MAC Address on the Radio
Required
Configuring WDS Port Security
Follow these steps to configure WDS port security:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter WLAN mesh
interface view
interface wlan-mesh
interface-number
—
Enable 11key
negotiation
port-security tx-key-type 11key
Required
By default, 11key negotiation is disabled.
Configure a PSK
port-security preshared-key
{ pass-phrase | raw-key } key
Required
By default, no PSK is configured.
Configure the port to
operate in PSK mode
port-security port-mode psk
Required
By default, the port operates in noRestrictions
mode.