beautypg.com

Configuring the radio of an ap, Configuring a radio interface – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual

Page 77

background image

10-9

Configuring the Radio of an AP

Follow these steps to configure the radio of an AP:

To do…

Use the command…

Remarks

Enter system view

system-view

Enter radio interface view

interface wlan-radio
interface-number

Specify a radio type for the
radio

radio-type { dot11b | dot11g |
dot11a }

Required

Map a service template to
the current radio

service-template
service-template-number
interface wlan-bss
interface-number

Required

Specify a channel number
for the radio

channel { channel-number |
auto }

Optional

By default, auto mode is enabled.

The working channel of a radio varies with
country codes and radio types. The channel
list depends on your device model.

Specify the maximum radio
power

max-power max-power

Optional

By default, the maximum radio power varies
with country codes, channels, AP models,
radio types and antenna types. If 802.11n is
adopted, the maximum radio power also
depends on the bandwidth mode.

Specify the type of
preamble

preamble { long | short }

Optional

By default, the short preamble is supported.

Configuring a Radio Interface

A set of radio parameters can be configured for a radio interface. If a radio interface is mapped to a radio

(for example, 802.11b/g or 802.11a), all parameters configured for the radio interface apply to the radio.

Follow these steps to configure a radio interface:

To do…

Use the command…

Remarks

Enter system view

system-view

Enter radio interface view

interface wlan-radio
interface-number

Required

Set the interval for sending beacon
frames

beacon-interval interval

Optional

100 time units (TUs) by default.

Set the number of beacon intervals
between DTIM frames

dtim counter

Optional

The default is 1.

Specify the fragmentation
threshold

fragment-threshold size

Optional

By default, the fragmentation
threshold is 2346 bytes.

Specify the Request to Send (RTS)
threshold

rts-threshold size

Optional

By default, the RTS threshold is
2346 bytes.

This manual is related to the following products: