beautypg.com

Protocols and standards, Configuring wlan service, Configuring global wlan parameters – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual

Page 75: Specifying the country code, Configuring global wlan parameters -7

background image

10-7

Protocols and Standards

For more information on protocols and standards, see:

z

ANSI/IEEE Std 802.11, 1999 Edition

z

IEEE Std 802.11a

z

IEEE Std 802.11b

z

IEEE Std 802.11g

z

IEEE Std 802.11i

z

IEEE Std 802.11-2004

Configuring WLAN Service

WLAN service configuration includes WLAN global configuration, country code, service template and

radio configuration.

Task

Description

Configuring Global WLAN Parameters

Optional

Specifying the Country Code

Required

Configuring a Service Template

Required

Configuring the Radio of an AP

Required

Configuring a Radio Interface

Required

Configuring Global WLAN Parameters

Follow these steps to configure global WLAN parameters

To do…

Use the command…

Remarks

Enter system view

system-view

Configure the idle timeout interval

wlan client idle-timeout interval

Optional

By default, the idle timeout interval
is 3600 seconds.

Configure the keep alive timeout
interval for the client

wlan client keep-alive interval

Optional

By default, keep alive function is
disabled.

Enable the fat AP to respond to the
probe requests with the SSID null
sent by the client

wlan broadcast probe reply

Optional

Enabled by default.

Specifying the Country Code

A country code identifies the country in which you want to operate the radio. It determines

characteristics such as operating power level and total number of channels available for the

transmission of frames. You need to configure the valid country code before configuring the fat AP.

Follow these steps to configure the country code:

This manual is related to the following products: