beautypg.com

Enabling wlan client isolation, Wlan service configuration examples, Wlan service configuration example – H3C Technologies H3C WA2600 Series WLAN Access Points User Manual

Page 81: Network requirements, Wlan service configuration example -13

background image

10-13

Figure 10-10 User isolation network diagram

As shown in

Figure 10-10

, after the fat AP is enabled with user isolation, clients 1 through 4 cannot

access each other directly, or learn one another’s MAC and IP addresses.

Enabling WLAN Client Isolation

Follow these steps to enable WLAN client isolation:

To do…

Use the command…

Remarks

Enter system view

system-view

Enable WLAN client
isolation

wlan-client-isolation enable

Optional

Enabled by default.

WLAN Service Configuration Examples

WLAN Service Configuration Example

Network requirements

As shown in

Figure 10-11

, it is required to enable the client to access the internal network resources at

any time. More specifically:

z

The AP provides plain-text wireless access service with SSID service.

z

The AP adopts 802.11g.

Figure 10-11 Network diagram for WLAN service configuration

LAN Segment

This manual is related to the following products: