H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 208)

197
Configuring the MVRP registration mode
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view.
• Enter Layer 2 Ethernet interface
view or Layer 2 aggregate
interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual
port-group-name
Use one of the commands.
3. Configure the MVRP
registration mode. mvrp registration { fixed |
forbidden | normal }
Optional.
The default setting is normal
registration mode.
Configuring MRP timers
CAUTION:
The MRP timers apply to all MRP applications, for example, MVRP, on a port. To avoid frequent VLAN
registrations and deregistrations, use the same MRP timers throughout the network.
Each port maintains its own Periodic, Join, and LeaveAll timers, and each attribute of a port maintains a
Leave timer.
To configure MRP timers:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view.
• Enter Layer 2 Ethernet interface
view or Layer 2 aggregate
interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual
port-group-name
Use one of the commands.
3. Configure the LeaveAll timer. mrp timer leaveall timer-value
Optional.
The default setting is 1000
centiseconds.
4. Configure the Join timer. mrp timer join timer-value
Optional.
The default setting is 20
centiseconds.