H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 156)

145
[DeviceB-GigabitEthernet1/0/2] port access vlan 2
[DeviceB-GigabitEthernet1/0/2] port isolate-user-vlan host
[DeviceB-GigabitEthernet1/0/2] quit
[DeviceB] interface gigabitethernet 1/0/3
[DeviceB-GigabitEthernet1/0/3] port access vlan 3
[DeviceB-GigabitEthernet1/0/3] port isolate-user-vlan host
[DeviceB-GigabitEthernet1/0/3] quit
# Assign the downlink port GigabitEthernet 1/0/6 to VLAN 6, and configure the port to operate
in host mode in VLAN 6. Assign the downlink port GigabitEthernet 1/0/8 to VLAN 8, and
configure the port to operate in host mode in VLAN 8.
[DeviceB] interface gigabitethernet 1/0/6
[DeviceB-GigabitEthernet1/0/6] port access vlan 6
[DeviceB-GigabitEthernet1/0/6] port isolate-user-vlan host
[DeviceB-GigabitEthernet1/0/6] quit
[DeviceB] interface gigabitethernet 1/0/8
[DeviceB-GigabitEthernet1/0/8] port access vlan 8
[DeviceB-GigabitEthernet1/0/8] port isolate-user-vlan host
[DeviceB-GigabitEthernet1/0/8] quit
2. Configure Device A:
# Create VLAN 5 and VLAN 10.
[DeviceA] vlan 5
[DeviceA-vlan5] quit
[DeviceA] vlan 10
[DeviceA-vlan10] quit
# Configure GigabitEthernet 1/0/1 as a hybrid port, and configure the port to permit the packets
from VLAN 5 and VLAN 10 to pass through tagged.
[DeviceA] interface gigabitethernet 1/0/1
[DeviceA-GigabitEthernet1/0/1] port link-type hybrid
[DeviceA-GigabitEthernet1/0/1] port hybrid vlan 5 10 tagged
[DeviceA-GigabitEthernet1/0/1] quit
Verifying the configuration
# Display the configuration of isolate-user-VLAN 5. (The output for isolate-user-VLAN 10 is similar.)
[DeviceB] display isolate-user-vlan 5
Isolate-user-VLAN VLAN ID : 5
Secondary VLAN ID : 2-3
VLAN ID: 5
VLAN Type: static
Isolate-user-VLAN type : isolate-user-VLAN
Route Interface: not configured
Description: VLAN 0005
Name: VLAN 0005
Tagged Ports:
GigabitEthernet1/0/1
Untagged Ports:
GigabitEthernet1/0/2 GigabitEthernet1/0/3