H3C Technologies H3C S5820X Series Switches - Manual (Page 47)

37
Rack-mounting the S5820X-28S or S5820X-28C switch
This installation task requires two persons.
1. Wear an ESD-preventive wrist strap and make sure it makes good skin contact and is well
grounded.
2. Check that the mounting brackets have been securely attached to the switch. See " Attaching the
mounting brackets to the switch chassis (for the S5820X-28S and S5820X-28C) ."
3. Install the user-supplied cage nuts in the mounting holes in the rack posts.
4. One person holds the switch chassis and aligns the mounting brackets with the mounting holes in
the rack posts, and the other person fixes the mounting brackets with anti-rust screws (user-supplied)
to the rack.
5. Check that the switch chassis is horizontal and tighten the screws.