H3C Technologies H3C S5820X Series Switches - Manual (Page 39)

29
Table 23 Install an S5820X-28S or S5820X-28C switch in the rack
Mounting bracket position
Installing the mounting
brackets
Installing chassis
rails and slide rails
Installing the
switch
• Rear mounting (near the
power supplies)
• Front mounting (near the
network ports)
• Mid-mounting
See " Attaching the mounting
brackets to the switch chassis
(for the S5820X-28S and
S5820X-28C) ."
Not required.
See
"
Rack-mounting
the S5820X-28S
or S5820X-28C
switch ."
Mounting bracket and cable management bracket kits
Table 24 Mounting bracket and cable management bracket kits for the H3C S5820X Switch Series
Switch Mounting bracket Cable management
bracket
Bracket view
S5820X-26S
S5820X-28S
One pair of 1U mounting
brackets (supplied with the
switch)
N/A See Figure 20 .
S5820X-28C
One pair of 2U mounting
brackets (supplied with the
switch)
One pair (supplied
with the switch)
The mounting brackets and cable
management brackets are secured
together by default (see Figure 21 ).
Figure 20 1U mounting bracket kit
The S5820X-28C switch comes with a pair of cable management brackets for managing and routing
cables. When shipped, the cable management brackets are secured to the mounting brackets, as shown
in Figure 21 .