H3C Technologies H3C S5820X Series Switches - Manual (Page 18)

8
Management Ethernet port
The S5820X-26S and S5820X-28S switches have one management Ethernet port. You can connect this
port to a PC or management station for loading and debugging system software or remote management.
Table 5 Management Ethernet port specifications
Item Specification
Connector type RJ-45
Connector quantity 1
Port transmission rate 10/100/1000 Mbps, half/full duplex
Transmission medium and max
transmission distance
100 m (328.1 ft) over category-5 twisted pair cable
Functions and services Switch software and Boot ROM upgrade, network management
USB port
Every S5820X switch has one OHC-compliant USB2.0 port that can upload and download data at a
rate up to 12 Mbps. You can use this USB port to access the file system on the Flash of the switch, for
example, to upload or download application and configuration files.
NOTE:
USB devices from different vendors vary in compatibility and driver. H3C does not guarantee correct
operation of USB devices from other vendors on the switch. If a USB device does not operate correctly on
the switch, replace it with one from another vendor.
10/100/1000Base-T Ethernet port
Every S5820X switch has 10/100/1000Base-T Ethernet ports.
Table 6 10/100/1000Base-T Ethernet port specifications
Item Specification
Connector type RJ-45
Interface attributes
• 10 Mbps, full duplex
• 100 Mbps, full duplex
• 1000 Mbps, full duplex
• MDI/MDI-X, auto-sensing
Max transmission
distance
100 m (328.08 ft)
Transmission medium Category-5 (or above) twisted pair cable
Standards IEEE 802.3i, 802.3u, 802.3ab