H3C Technologies H3C S5820X Series Switches - Manual (Page 40)

30
Figure 21 2U cable management bracket and mounting bracket kit
(1) Cable management bracket (2) Mounting bracket
Rack mounting rail kit
The S5820X-26S switch comes with a pair of chassis rails and a pair of slide rails.
Figure 22 Rack mounting rail kit
(1) Chassis rail (2) Slide rail
Attaching the mounting brackets, chassis rails, and grounding
cable to the switch chassis (for the S5820X-26S)
The S5820X-26S switch provides one front mounting position (near the network ports) and one rear
mounting position (near the power modules), and three grounding points—one primary grounding point
(with a grounding sign), and two auxiliary grounding points. You use the primary grounding point in
most cases. If the primary grounding point fails or is not suitable for the installation site, use one of the
auxiliary grounding points.