H3C Technologies H3C S5820X Series Switches - Manual (Page 20)

10
Transceiver
module/cable
Central
wavelength
Connector Fiber Max transmission distance
LSTM1STK N/A N/A SFP+ cable 5m (16.40 ft)
LSTM2STK N/A N/A SFP+ cable 7 m (22.97 ft)
NOTE:
•
To guarantee the functionality of the SFP+ ports, use only H3C SFP and SFP+ transceiver modules on the
S5820X-26S and S5820X-28S switches.
• The available SFP and SFP+ transceiver modules are subject to change over time. For the most
up-to-date list of SFP transceiver modules, consult your H3C sales representative or technical support
engineer.
• For more specifications for these transceiver modules, see H3C Low End Series Ethernet Switches
Pluggable Modules Manual.
The SFP+ cables available for the H3C S5820X Switch Series are 10 Gbps SFP+ Cu cables, as shown
in
Figure 8 .
Figure 8 SFP+ cable
(1) Connector (2) Pull latch
LEDs
The H3C S5820X Switch Series provides the following LEDs for you to monitor the health and operating
status of the switch:
• System status LED
• Power module status LEDs
• Seven-segment LED
• Port mode LED
• 10/100/1000Base-T Ethernet port LED
• SFP+ port
• Management Ethernet port LEDs
• OAP card status LED