H3C Technologies H3C S5820X Series Switches - Manual (Page 17)

7
NOTE:
The S5820X-28C switch comes with the expansion interface card slots covered by filler panels. In this
figure, two LSW1SP4P0 interface cards are installed in the slots.
Rear panel
Figure 7 S5820X-28C rear panel
(1) OAP card slot (2) Filler panel (do not remove it)
(3) Grounding screw (4) Filler module (do not remove it)
(5) Power module slot 2 (6) Power module slot 1
(7) Hot swappable fan tray
NOTE:
•
The S5820X-28C switch comes with power module slot 1 empty and power module 2 covered by a filler
panel. You can install one or two power modules for your switch as needed. In this figure, two
PSR300-12A AC power modules are installed in the slots.
• The S5820X-28C switch also comes with the OAP card slot covered by a filler panel.
Ports
Console port
An S5820X switch provides one console port on the front panel.
Table 4 Console port specifications
Item Specification
Connector type RJ-45
Compliant standard EIA/TIA-232
Transmission baud rate 9600 bps (default) to 115200 bps
Services
• Provides connection to an ASCII terminal.
• Provides connection to the serial port of a local or remote (through a pair of
modems) PC running terminal emulation program.