H3C Technologies H3C S10500 Series Switches - Manual (Page 87)

76
Task Remarks
Enabling the spanning tree feature Required
Performing mCheck Optional
Configuring protection functions Optional
Complete the following tasks to configure MSTP:
Task Remarks
Setting the spanning tree mode
Optional
By default, the device
works in MSTP mode.
Configuring an MST region Required
Configuring the root bridge or a secondary root bridge Optional
Configuring the device priority Optional
Configuring the maximum hops of an MST region Optional
Configuring the network diameter of a switched network Optional
Configuring spanning tree timers Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring the port link type Optional
Configuring the mode a port uses to recognize/send MSTP packets Optional
Enabling the output of port state transition information Optional
Configuri
ng the
root
bridge
Enabling the spanning tree feature Required
Setting the spanning tree mode
Optional
By default, the device
works in MSTP mode.
Configuring an MST region Required
Configuring the device priority Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring path costs of ports Optional
Configuring the port priority Optional
Configuring the port link type Optional
Configuring the mode a port uses to recognize/send MSTP packets Optional
Enabling the output of port state transition information Optional
Configuri
ng the leaf
nodes
Enabling the spanning tree feature Required
Performing mCheck Optional