H3C Technologies H3C S10500 Series Switches - Manual (Page 191)

180
To do... Use the command... Remarks
Create a class and enter class view
traffic classifier classifier-name [ operator
and ]
Required
By default, the
operator of a class is
AND.
Configure a match criterion to match the
specified inner VLAN IDs
if-match customer-vlan-id vlan-id-list Required
Configure a match criterion to match the
specified outer VLAN IDs
if-match service-vlan-id vlan-id Required
Return to system view quit —
Create a traffic behavior and enter traffic
behavior view
traffic behavior behavior-name Required
Configure the action of marking the inner
VLAN IDs
remark customer-vlan-id vlan-id Required
Return to system view quit —
Create a QoS policy and enter QoS
policy view
qos policy policy-name Required
Associate the traffic class with the traffic
behavior defined earlier classifier classifier-name behavior
behavior-name
Required
Return to system view quit —
Enter Ethernet interface view or port
group view of the service provider
network-side port
• Enter Ethernet interface view:
interface interface-type interface-number
• Enter port group view:
port-group manual port-group-name
Required
Use either command.
Apply the QoS policy to the outgoing
traffic
qos apply policy policy-name outbound Required
Configuring the TPID value in VLAN tags
Follow these steps to configure the TPID value of a VLAN tag:
To do... Use the command... Remarks
Enter system view system-view —
Configure the TPID in the
customer network VLAN tags qinq ethernet-type customer-tag hex-value Optional
0x8100 by default.
Enter interface view or port
group view of the service
provider network-side port
• Enter Ethernet interface view or Layer 2
aggregate interface view:
interface interface-type interface-number
• Enter port group view:
port-group manual port-group-name
Required
Use either command.
Configure the TPID in the
service provider network
VLAN tags
qinq ethernet-type service-tag hex-value
Optional
0x8100 by default.