H3C Technologies H3C S10500 Series Switches - Manual (Page 220)

209
Figure 70 Network diagram for one-to-one and many-to-one VLAN mapping configuration
Configuration procedure
1. Configuring Switch A.
# Create the CVLANs and the SVLANs.
system-view
[SwitchA] vlan 2 to 3
[SwitchA] vlan 101 to 102
[SwitchA] vlan 201 to 202
[SwitchA] vlan 301 to 302
# Configure uplink policies p1 and p2 to enable one SVLAN to transmit one service for one customer.
[SwitchA] traffic classifier c1
[SwitchA-classifier-c1] if-match customer-vlan-id 1
[SwitchA-classifier-c1] traffic classifier c2