H3C Technologies H3C S12500-X Series Switches - Manual (Page 77)

69
Step Command Remarks
5. Configure the multi-hop
detection time multiplier. bfd multi-hop detect-multiplier
value
The default setting is 5.
6. Configure the minimum
interval for receiving multi-hop
BFD control packets.
bfd multi-hop min-receive-interval
value The default setting is 400
milliseconds.
7. Configure the minimum
interval for transmitting
multi-hop BFD control packets.
bfd multi-hop
min-transmit-interval value The default setting is 400
milliseconds.
Displaying and maintaining BFD
Execute the display command in any view and the reset command in user view.
Task Command
Display BFD session information. display bfd session [ discriminator value | verbose ]
Clear BFD session statistics. reset bfd session statistics