Configuration restrictions and guidelines, Configuration procedure, Operational key – H3C Technologies H3C S12500-X Series Switches User Manual
Page 61: Configuration types
50
Configuration restrictions and guidelines
When you enable link-aggregation traffic redirection, follow these restrictions and guidelines:
•
Link-aggregation traffic redirection applies only to dynamic link aggregation groups and takes
effect on only known unicast packets.
•
To prevent traffic interruption, enable link-aggregation traffic redirection on devices at both ends of
the aggregate link.
•
To prevent packet loss that might occur at a reboot, do not enable spanning tree together with
link-aggregation traffic redirection.
Configuration procedure
To enable link-aggregation traffic redirection:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable link-aggregation traffic
redirection.
link-aggregation lacp
traffic-redirect-notification enable
By default, link-aggregation traffic
redirection is disabled.
Displaying and maintaining Ethernet link
aggregation
Execute display commands in any view and reset commands in user view.
Task
Command
Display information for an aggregate interface
or multiple aggregate interfaces.
display interface [ bridge-aggregation ] [ brief [ down |
description ] ]
display interface bridge-aggregation interface-number
[ brief [ description ] ]
Display the local system ID.
display lacp system-id
Display the global or group-specific
link-aggregation load sharing criteria.
display link-aggregation load-sharing mode [ interface
[ bridge-aggregation interface-number ] ]
Display detailed link aggregation information
for link aggregation member ports.
display link-aggregation member-port [ interface-list ]
Display summary information about all
aggregation groups.
display link-aggregation summary
Display detailed information about specific or
all aggregation groups.
display link-aggregation verbose [ bridge-aggregation
[ interface-number ] ]
Clear LACP statistics for specific or all link
aggregation member ports.
reset lacp statistics [ interface interface-list ]
Clear statistics for specific or all aggregate
interfaces.
reset counters interface [ bridge-aggregation
[ interface-number ] ]