H3C Technologies H3C S12500-X Series Switches - Manual (Page 132)

121
Step Command Remarks
9. Return to system view. quit N/A
10. Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view.
interface interface-type
interface-number
N/A
11. Assign the downlink port to
secondary VLANs.
a. Set the link type of the
port:
port link-type { access |
hybrid | trunk }
b. Assign the access port to
the specified VLAN:
port access vlan vlan-id
c. Assign the trunk port to the
specified VLANs:
port trunk permit vlan
{ vlan-id-list | all }
d. Assign the hybrid port to
the specified VLANs:
port hybrid vlan
vlan-id-list { tagged |
untagged }
Select sub-step b, c, or d
depending on the port link type.
12. Configure the downlink port
to operate in host mode.
port private-vlan host
By default, an interface does not
operate in host mode.
13. Enter primary VLAN view. vlan vlan-id N/A
14. Associate the primary VLAN
with the specified secondary
VLANs. private-vlan secondary vlan-id-list
By default, a primary VLAN is not
associated with any secondary
VLAN.
Displaying and maintaining the private VLAN
Execute the display command in any view.
Task Command
Display information about primary VLANs and the
secondary VLANs associated with each primary VLAN. display private-vlan [ primary-vlan-id ]
Private VLAN configuration examples
Private VLAN configuration example in promiscuous mode
Network requirements
As shown in Figure 34 :