Network requirements, Performing mcheck in interface view, Configuring digest snooping – H3C Technologies H3C S12500-X Series Switches User Manual
Page 135
124
Untagged ports:
Ten-GigabitEthernet1/0/1 Ten-GigabitEthernet1/0/2
Ten-GigabitEthernet1/0/5
VLAN ID: 2
VLAN type: Static
Private VLAN type: Secondary
Route interface: Not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged ports: None
Untagged ports:
Ten-GigabitEthernet1/0/2 Ten-GigabitEthernet1/0/5
VLAN ID: 3
VLAN type: Static
Private VLAN type: Secondary
Route interface: Not configured
Description: VLAN 0003
Name: VLAN 0003
Tagged Ports: None
Untagged Ports:
Ten-GigabitEthernet1/0/1 Ten-GigabitEthernet1/0/5
Private VLAN configuration example in trunk promiscuous
mode
Network requirements
As shown in
:
•
VLAN 5 and VLAN 10 are primary VLANs on Device B. The uplink port Ten-GigabitEthernet 1/0/1
permits the packets from VLAN 5 and VLAN 10 to pass through tagged.
•
On Device B, the downlink port Ten-GigabitEthernet 1/0/2 permits secondary VLAN 2, and the
downlink port Ten-GigabitEthernet 1/0/3 permits secondary VLAN 3. Secondary VLANs 2 and 3
are associated with primary VLAN 5.
•
On Device B, the downlink port Ten-GigabitEthernet 1/0/6 permits secondary VLAN 6, and the
downlink port Ten-GigabitEthernet 1/0/8 permits secondary VLAN 8. Secondary VLANs 6 and 8
are associated with primary VLAN 10.
•
Device A is aware of only VLANs 5 and 10 on Device B.