6 management of h2o sections and main command, 7 management of hydraulic functions, 8 job selection – ARAG GCS 3200 User Manual
Page 37: Par 15.6, Par 15.7
37
USE
15.6
Management of H2O sections and main command
Fig. 89
- Press
G
to enable or disable the main command.
- Press
I
to close and open the sections to the left, starting from the first
available on the right
- Press
J
to close and open the sections to the right, starting from the first
available on the left
- Press
H
to close the sections starting from the left.
- Press
A
to close the sections starting from the right.
COMMANDS ONLY WORK IF NO AUXILIARY INPUT DEVICE IS
CONNECTED.
15.7
Management of hydraulic functions
Fig. 90
Fig. 91
Fig. 92
Press the keys to enable or disable the following functions:
/
Boom height:
Lift /
Lower
/
Release /
Lock
/
Inclination:
Left /
Right
Hydraulic functions:
Function enabling 1
Hydraulic functions:
Function disabling 1
COMMANDS ONLY WORK IF NO AUXILIARY INPUT DEVICE IS
CONNECTED.
15.8
Job selection
It accesses the
Job Selection
Refer to Par. 13.2.