ARAG GCS 3200 - Manual (Page 29)

29
13.3 Nozzles setup
Fig. 60 Fig. 61
Features that can be set for each USER nozzle (Fig. 61):
- value of minimum and maximum reference pressure (
bar or PSI ).
- value of the reference flow rate ( l/min or GPM ) that allows the ISOBUS system to calculate the pressure even without a pressure sensor.
WARNING: “ISO” NOZZLES CAN NOT BE MODIFIED.
Data to be set for each type of nozzle (ISO included):
- alarm value of minimum reference pressure
- alarm value of maximum reference pressure
The rate of the nozzle being used allows the ISOBUS system to calculate the pressure without a pressure sensor.
noZZles
Nozzle colour ISO code
Unit of measurement
METRIC
Unit of measurement
US
The values for pressure bar and flowrate
l/min can be modified for “USER”
nozzles ONLY, not for “ISO” nozzles.
Flowrate
(l/min)
Pressure
(bar)
Flowrate
(GPM)
Pressure
(PSI)
Orange ISO01 0,40 3,0 0,100 40
Green ISO015 0,60 3,0 0,150 40
Yellow ISO02 0,80 3,0 0,200 40
Lilac ISO025 1,00 3,0 0,250 40
Blue ISO03 1,20 3,0 0,300 40
Red ISO04 1,60 3,0 0,400 40
Brown ISO05 2,00 3,0 0,500 40
Gray ISO06 2,40 3,0 0,600 40
White ISO08 3,20 3,0 0,800 40
Light blue ISO10 4,00 3,0 1,000 40
Light green ISO15 6,00 3,0 1,500 40
Black ISO20 8,00 3,0 2,000 40
Type A -- 0,98 5,0 0,026 73
User data:
0,01 ÷ 99,9 Type B -- 2,01 5,0 0,053 73
Type C -- 2,99 5,0 0,079 73
Type D -- 4,01 5,0 0,106 73
Tab. 9
USER SETTING