ARAG GCS 3200 - Manual (Page 33)

33
13.8 Main page setting
Fig. 76
1
2
3 3
1
Fig. 77
Set the job main page of the ISOBUS system (Fig. 77)
1 Scale: Enter a value between 0 and 65535 to define the scale maximum value (Speed Parameter and Pressure Parameter)
2 Range unit of measurement: Select the unit of measurement of the fluid contained in the tank: l or ha .
3 Surface / Flow rate: Select the data you want to display: Surface - Sprayed liquid - Flowrate - Rev counter - Productivity
Spraying time - Sprayed rate - Distance - Tank fluid .
14 Job functions
Fig. 78
F Allows accessing the following page and displays other
function (Fig. 86)
G Manages the liquid n the tank (par 14.1)
H Displays or resets job data (par 14.2)
I Allows setting the transducer to zero (par 14.3)
J Allows setting the User programming (par 13)
14.1 Tank filling
Manages tank filling.
Fig. 79
2000 l
The ISOBUS system displays the quantity of fluid inside the tank,
calculated according to the quantity already sprayed.
In alternative, it is possible to enter the data manually by pressing on the
value and entering the corresponding number.
Filled quantity
Displays the quantity of fluid that the loading pump is supplying to the
tank.
If the filling value has been entered manually, the display shows the
difference between the detected value and the entered one.
Complete filling up
The ISOBUS system, without external inputs about the filling process,
displays the maximum filling value of the tank: the maximum value has been
set in the advanced programming menu (par.12.9).
WARNING!
Stop the loading pump when you have reached the maximum
capacity of the tank.
USER SETTING