Amer Networks SS3GR24i - Manual (Page 60)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
54
Example usage:
Setup jumbo port 1/1
24P switch(config)# interface fa1/1
24P switch(config-if)# jumbo
getport
Purpose Used to get the port ID from the active switch.
Syntax getport
Description To get the current port ID of the switch which is
working at that time.
Parameters None.
Menu None.
Restrictions
Interface configuration
Example usage:
Get the current port ID
24P switch(config-if)# getport
Module : 2
Port : 2