Amer Networks SS3GR24i - Manual (Page 112)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
106
frame-type
Purpose Used to setup the frame type on a port.
Syntax frame-type { all|tag-only }
Description To configure frame type on port.
Parameters admit all packet
tagged packet only
Menu VLAN Management -> VLAN Port Configuration
Menu
Restrictions Interface configuration
Example usage:
Set port 1/2 frame type admit all
24P switch(config)# interface fa1/2
24P switch(config-if)# frame-type all
show vlan
Purpose Used to display the switch’s VLAN information.
Syntax show vlan {all | }
Description The command is to show VLAN information.
Parameters all vlan
VLAN ID
Menu None.
Restrictions Privileged
EXEC