Amer Networks SS3GR24i - Manual (Page 20)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
14
4
C
OMMAND
H
IERARCHY
There are four different levels of access to the SS3GR24i/SS3GR48i. Each
level has its own commands that are only available in each level. The
following section describes the four different levels and the command used to
gain access to them.
Command Level Prompt Enter / Exit Command
User EXEC 24P Switch> Default mode
Type logout or exit to
quit CLI.
Privileged EXEC 24P Switch# Type enable to enter
from user EXEC mode.
Type exit to go back to
User EXEC
Global Configuration 24P Switch(config)# Type config to enter
from Privileged EXEC.
Type exit to go back to
Privileged EXEC.
Interface Configuration 24P Switch(config-if)# Type int or interface
plus
or
to enter from
Global configuration
mode.
Type exit to go back to
Global Configuration.