Amer Networks SS3GR24i - Manual (Page 140)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
134
Example usage:
Set the switch’s supp-timeout 60 sec on port 1/7
24P switch(config)# interface fa1/7
24P switch(config-if)# dot1x timeout supp-timeout 60
dot1x timeout server
Purpose Used to configure the switch’s time it waits for a
response radius frame.
Syntax dot1x timeout server
Description Set the number of seconds that the switch waits for a
response Radius frame.
Parameters Set the number of seconds
Menu Advanced Switch Configuration -> Port Base Access
Control Configuration Menu
Restrictions Interface configuration
Example usage:
Set the switch’s transmit time 10 sec on port 1/3
24P switch(config)# interface fa1/3
24P switch(config-if)# dot1x timeout server 10