Amer Networks SS3GR24i - Manual (Page 144)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
138
Example usage:
Initiate 802.1x status on port 1/5.
24P switch(config)# interface fa1/5
24P switch(config-if)# dot1x init
dot1x control-direction
Purpose Used to configured the port Administrative Control
Direction
Syntax dot1x control-direction {both | in}
Description To set the port Administrative Control Direction.
Parameters The dot1x authentication will be imposed only
on the incoming traffic
The dot1x authentication will be imposed on
incoming and outgoing traffic
Menu Advanced Switch Configuration -> Port Base Access
Control Configuration Menu
Restrictions Interface configuration
Example usage:
Set the switch’s Control direction to in for port 1/5.
24P switch(config)# interface fa1/5
24P switch(config-if)# dot1x control-direction in