Amer Networks SS3GR24i - Manual (Page 106)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
100
vlan init
Purpose Used to clear all VLAN port settings.
Syntax vlan init
Description To remove all vlan, all port reset to default VLAN.
Parameters None.
Menu
Advanced Switch Configuration -> VLAN
Management Menu
Restrictions Global configuration
Example usage:
Remove all VLAN configuration.
24P switch(config)# vlan init
getvlan
Purpose Used to display the current VLAN switch ID.
Syntax getvlan
Description To get the current vlan ID that switch is working at
that time.
Parameters None.
Menu None.
Restrictions
Interface configuration