Amer Networks SS3GR24i - Manual (Page 38)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
32
snmp-server host
Purpose Used to configure the receiver of SNMP notifications.
Syntax snmp-server host type {v1|v2} trap
Description To set up the recipient of SNMP notification
operation.
Parameters The range is 1-10
IP address of the recipient
Trap Specifies trap community string
{v1|v2} Trap type(v1,v2)
A string of length with 20 characters
maximum
Menu SNMP Configuration -> SNMP Trap Receiver
Configuration
Restrictions Global configuration
Example usage:
Add snmp trap receiver type v1 ip 192.168.1.1. community private in index
10.
24P switch(config)# snmp-server host 1 type v2 192.168.1.1.
trap private