Amer Networks SS3GR24i - Manual (Page 149)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
143
sntp poll-interval
Purpose Used to setup the poling interval for sntp operation.
Syntax sntp poll-interval
Description To configure the polling interval for sntp operation.
Parameters Integer value ranges from 1 to 1440 minutes.
Menu Basic Switch Configuration -> SNTP Configuration
Menu
Restrictions Global configuration
Example usage:
Set the switch to use SNTP polling interval of 300 minutes.
24P switch(config)# sntp poll-interval 300
sntp daylight-saving
Purpose Used to configure daylight savings time for the switch.
Syntax sntp daylight-saving
Description To enable or disable daylight saving, if time zone is
applicable.
Parameters None.
Menu
Basic Switch Configuration -> SNTP Configuration
Menu
Restrictions Global configuration