Amer Networks SS3GR24i - Manual (Page 138)

SS3GR24i/SS3GR48i Layer 3 Switch CLI Reference
132
Example usage:
Set the switch’s port-control to auto on port 2/5
24P switch(config)# interface fa2/5
24P switch(config-if)# dot1x port-control auto
dot1x re-authentication
Purpose Used to setup 802.1x port re-authentication.
Syntax dot1x re-authentication
Description To enable or disable 802.1x port re-authentication.
Parameters None.
Menu
Advanced Switch Configuration -> Port Base Access
Control
Restrictions Interface configuration
Example usage:
Setup re-authentication on port 1/7.
24P switch(config)# interface fa1/7
24P switch(config-if)# dox1x re-authentication