AEC WD 350 through WD3000 Dehumidifying Dryers - Manual (Page 69)

• To execute programmed operations, set the manual override switch on the seven day timer
to the
RUN position.
• To de-energize the seven day timer, set the manual override switch to the OFF position.
Notes: • The dryer will not run if the timer switch is OFF .
• Program 1 is operational, Program 2 is not used.
Setting the Current Day of the Week, Hour and Minute
1. Apply main power to the dryer.
2. Turn on the timer by sliding the left manual override switch to the ON position. Timer
memory clears on power-up.
3. Press and hold
MODE
until TIM ADJ becomes visible and SUN blinks.
4. Press or until the current day of the week displays.
5. Press to store the current day of the week in timer memory. The day of the week
indicator stops blinking.
6. The current hour indicator should now be blinking. Press or to set the current
hour. The time is set in a 24-hour format.
7. Press to store the current hour in timer memory. The hour indicator stops blinking.
8. Press or to set the current blinking current minute indicator.
9. Press to store the current minute in timer memory. The minute indicator should stop
blinking.
Setting the Startup Time
1. Press and hold
MODE
until PROG 1 illuminates and the hour indicator blinks.
2. Press or until the dryer startup hour you want displays. The startup time is set in
24-hour format.
Page 68 WDMR and WDFR Series Dehumidifying Dryers