Taskbuilder user interface, Setting up taskbuilder – Wavetronix Command Translator (CMD-DT) - User Guide User Manual

Page 74

In this chapter

˽ Setting Up TaskBuilder

˽ TaskBuilder User Interface

˽ TaskBuilder Menu and Toolbar Buttons

˽ Select/Action Toolbar

˽ Component List

˽ Main Task Window

˽ Properties Area

Setting Up TaskBuilder

TaskBuilder comes installed and configured on the Translator machine after purchase.

Those using TaskBuilder on the Translator machine will not need to perform any additional

preparation before using it. It is not necessary for TaskBuilder to be run on the same ma-

chine as the Translator; TaskBuilder can be installed on any Windows machine (XP/Server

2003 or newer) that has network access to Translator.

To install TaskBuilder on a separate machine, simply run TaskBuilder installation program

(“TaskBuilderInstall.exe”). This program can be downloaded from the Translator Web ap-

plication on the System > TaskBuilder page. TaskBuilder requires .NET framework 3.5; if

the proper version is not installed on your machine, the installer includes a link to down-

load and install the required framework.

Depending on the system configuration and the desired functionality to be used within

TaskBuilder, some additional software may need to be installed after the TaskBuilder instal-

TaskBuilder User Interface