Wavetronix Command Translator (CMD-DT) - User Guide - Manual (Page 64)

CHAPTER 5 • SYSTEM PAGE 63
Collectors Tab
Click the Collectors link to access the Collectors screen (see Figure 5.6). The Collectors
section provides a list of all Collector services currently registered in the Translator system.
Figure 5.6 – Collectors Screen
Current Collector services are listed in the grid with their host name, IP address and their
current total number of sensors registered on their system. To add a new Collector, enter
the host name into the Host: field and push Add. The Translator service will attempt to
contact the Collector service at that host name and download the sensor information.
Alternately, you can push the Search for Command Collectors button to attempt to find
Collector systems on the local network automatically. The Find Command Collectors win-
dow will open (see Figure 5.7) and display any Collector services found on the network.
Check the box beside each entry and push Add to add one or more Collector services to
the Translator system.
Figure 5.7 – Find Command Collectors Window
Collector registrations can be deleted using the Remove link in the Collector grid. Push
Update to update the number of sensors for any of the Collector services.