Wavetronix Click 111 (16-channel Contact Closure Eurocard) (CLK-111) - User Guide - Manual (Page 31)

30 CliCk 111 • User GUIde
Figure 8 – Selecting a Driver
After you have made configuration changes on the driver and saved it to the Click device,
the word “current” will appear after it to indicate the driver is currently loaded onto the
device.
The Backups option can be used to read configurations that have previously been saved to
file.
Expert Driver
The Expert driver contains two tabs, System and Diagnostics; the System tab is then sub-
divided further.
The System > General tab lets you change general information about your device. The tab
has the following parameters (see Figure 9and Table 19):
Figure 9 – Expert Driver General Tab