beautypg.com

WallWizard X700CB Manual User Manual

Page 22

background image

22

www.closystems.com

Controlling X-arm™ with Home Automation (RJ11/RS232 port)

X-arm

X700CS and X700CB (not available on the X700RS and X700RB) can be controlled

through Home Automation remote controls and control panels such as those made by Crestron,

AMX, Control4 and life|ware. To do this, do the following:

1. Using a philips screw driver, remove both screws from the cover plate located at the

bottom, right-hand side of the control box.

2. Remove the cover plate to expose the RS232 port.

3. Download the RS232 program from the Home Automation vendor’s web site.

4. Plug the home automation control into the RS232 port on X-arm™ running the cord

out the back hole in the back plate of X-arm™.

5. Replace the cover plate and secure it in place with the screws.
6. Follow the vendor’s instructions.

RJ11/RS 232

Port

Cover Plate