WallWizard X700CB Manual - Manual (Page 11)

www.closystems.com 11
Optional Cross Plates - width of the TV holes is less than 21.50” (54.1 cm)
Cross plates do not ship standard with all X-arms, so they may
need to be ordered. Contact your local retailer or distributor
where you purchased the X-arm to order optional components.
Installation
1. Using a washer, lock washer and bolt,
attach the two cross plates to the back
of the TV. Make sure that the center
is flat against the TV.
2. Attach the brackets to the TV. Make sure
that the hook end is at the top.
Optional Bracket Extensions - height of the TV hole is greater than 18.5” (47 cm)
Bracket extensions do not ship standard with all X-arms, so they may need to
be ordered. Contact your local retailer or distributor where you purchased the
X-arm to order optional components.
Installation
1. Align the bracket extensions containing round holes with the
“hook end” of the TV mounting brackets. Align the bracket
extensions containing slots with the end of the TV brackets
containing slots.
2. Attach the bracket extensions to the TV mounting brackets with
the provided screws.
3. Attach the brackets to the TV with the hook end on the top.
Hook End
1.
2.
3.
Holes
on top.
Slots on
bottom.
Hook End