WallWizard X700CB Manual - Manual (Page 2)

2 www.closystems.com
Important Safety Instructions
(SAVE THESE INSTRUCTIONS)
!
WARNING:
When using X-arm™, basic precautions should always be followed, including:
• Read the entire users manual before attempting to use X-arm™.
• Keep everything and everyone away from X-arm™ while in motion. Do not contact moving parts.
• The user must observe the X-arm™ while it is in motion at all times until it is stopped by pressing on one of the
directional arrows on the remote control.
• Follow the installation instructions provided to correctly install X-arm™. To prevent injury, X-arm must be
securely attached to the wall in accordance with the installation instructions.
• X-arm™ restricts movement based upon the TV width set on the side controls of X-arm™. The TV width must
be set correctly before operating X-arm™.
• X-arm™ mounting bracket is intended for use only with the maximum weight of 180 pounds (81 kg). Use with
TVs heavier than 180 pounds (81 kg) may result in instability and cause injury.
• To reduce the risk of injury, close supervision is necessary when operating X-arm near children.
• Only use attachments recommended or sold by the manufacturer. Do not operate X-arm™ without all covers
and guards in place.
• Do not use outdoors.
• X-arm is designed to mount on vertical walls only. Do not mount X-arm on ceilings or non-vertical walls.
• To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Unplug from outlet when not in use and before servicing or cleaning.
• Do not operate X-arm with a damaged cord or plug, or after the appliance malfunctions or is dropped or
damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment.
• Connect to a properly grounded outlet only. See Grounding Instructions.
Grounding Instructions
This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock.
This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-
grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal.
Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to whether
the appliance is properly grounded. Do not modify the plug provided with
the appliance – if it will not fit the outlet, have a proper outlet installed by
a qualified electrician.
This appliance is for use on a circuit having a nominal rating more than
120 V, 15 A and is for use on a circuit having a nominal rating of 120 V),
and is factory equipped with a specific electric cord and plug. No adapter
should be used with this appliance. If the appliance must be reconnected
for use on a different type of electric circuit, the reconnection should be
made by qualified service personnel; and after the reconnection, the
appliance should comply with all local codes and ordinances.
Grounding
Pin
Cover of Grounded
Outlet Box
Grounding
Pin