WallWizard X700CB Manual - Manual (Page 15)

www.closystems.com 15
Universal Remote Control
Once programmed, the universal remote can control TVs, VCRs, DVD Players and Cable boxes.
See the pages following for instructions on how to program the remote.
Power turns on/off the selected
device.
DVD/VCR, once programmed,
makes the VCR/DVD the
selected device
MOUNT makes X-arm™ the selected
device.
TV, once programmed to your
TV, makes the TV the selected
device.
CBL, once programmed to your
Cable box, makes the Cable box the
selected device.
SET
This button sets the Preset
position to the current X-arm™
position. In other modes, this
button selects or sets options.
P1 moves X-arm™ to the
Preset 1 position.
P3 moves X-arm™ to the Preset 3
position. (X700CS & CB only)
P2 moves X-arm™ to the
Preset 2 position.
P4 moves X-arm™ to the Preset 4
position. (X700CS & CB only)
Arrow Buttons tilt the TV in
the direction of the button in X-
arm™ mode. In other modes
these navigate on-screen
menus.
IN or OUT, in X-arm™ mode, IN
returns X-arm™ to the home position
and OUT extends X-arm™.
MENU opens the setup menu
for the selected device.
EXIT leaves the current menu.
VOL adjusts the volume up or
down.
CH changes to the next/previous
channel or chapter.
M UTE turns the sound off for
the selected device.
FAV in CBL mode, returns to the
programmed favorite channel.
INFO displays information
about the current video source.
LAST goes to the last channel
selected.
Number buttons allow you to
TV/VCR rotates through the available
video sources for the selected
device.
GUIDE shows the guide in CBL
mode and turns on Closed
Captioning (CC) in TV mode.
Rewind rewinds the current
video.
enter the corresponding number.
Play plays the currently inserted
media.
ENTER selects the currently
highlighted option.
Pause Pauses the currently
playing video. Stop stops the currently playing
video.
Fast Forward fast forwards the
currently inserted video.
PIP turns on the Picture in
Picture.
SWAP switches the PIP and
background video sources.
Record starts recording.
POSITION on TV changes the
position of the PIP window. On
CBL: Page Down.
FREEZE on TV freezes the PIP,
on DVD displays Setup menus,
on VCR shows tape Speed, on
CBL:Page Up
OPEN/CLOSE opens/closes the
media tray of the selected device.
SLEEP Puts the selected device
into a sleep/low power consumption
state.
PIP SWAP
POSITION FREEZE
OPEN/CLOSE
SLEEP
P1 P3
+
VOL
+
CH
POWER
TV
SET
MOUNT
VCR
DVD CBL
IN OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU EXIT
MUTE
FAV
INFO TV/VCR GUIDE
LAST ENTER
1 2 3
4 5 6
7 8 9
0
P2 P4