Visara Master Console Center Installation - Manual (Page 25)

Chapter 4 MCC Network
Installation Preparation Guide 25
MCC Network Specifications
Physical Connections
RJ-45 terminated must be run to each Thin Client / workstation, and to
the location of each MCC server. The MCC server may be plugged into
any hub/switch/router as will any Thin Client / workstations that are
connected directly to the MCC (instead of through the customer’s
corporate network).
Network Planning
Visara recommends using a separate IP subnet large enough for all MCC
units, workstations, and SCON/iCON units.
Note: Devices connected to the MCC (for example, UNIX hosts to
be monitored through telnet) need not be on this same
subnet, but the MCC must be able to connect through the
network to them.
If the IP addresses of the MCC server(s) and all user interfaces can be
supplied to Visara by the customer before shipment, the MCC can be pre-
configured with this information prior to shipping instead of configuring
on-site.